Cloud Revolution - Steam Train Boost coils

Steam Train Boost  is designed to be a hand made direct replacement to the Geekvape Aegis Boost RBA Pod 0.6Ω Coil. The same materials that were used in that coil were 28G Nichrome 80 and 40G Nichrome 80. With high quality Wire Buddha wire this resulted in a decrease from 0.6Ω to 0.5Ω which results in superior quality and performance of Steam Train Boost coils.  

Core: 2 x 28G Wire Buddha Nichrome 80

Fuse: 40g Wire Buddha Nichrome 80

Wraps: 6/7 with opposing leads

Inner Diameter: 3mm

Single Coil Resistance approximately: 0.5Ω

1 Pair

 Rebuilding is for experienced users only and a knowledge of ohms’ law should be considered when building coils for Rebuildable Atomiser's. The distance of the coils from the post can affect the resistance of the build. Always exercise caution building your atomiser, always check your build’s resistance on an ohm reader before firing it on any device. Coils that are touching any part of the deck, air flow controller or any part of the coil touching any of the atomiser's posts can result in a short and can cause serious damage to your devices if not checked on an ohm reader before use. Make sure to use high drain and high amperage batteries when using advanced user devices.